Scaffolding, Formwork - Cital.store

Products

MS Scaffolding Waller

MS Scaffolding waller

18 - 18.5 kg, 22 kg, 9 - 9.5 kg, 9 kg, 3 meter, 4 feet, 8 feet

Scaffolding Joint Pin with Washer

Fischer Anchor Bolt & Fastener FBN II (10/50)

Fischer Anchor Bolt & Fastener FBN II (Dash Fasteners)

10 x 120 mm, 10 x 125 mm

Gabdi Angle Plate

2-2.5 kg, 4-4.5 kg, 150 mm × 3 ft, 230 mm × 3 ft

Fischer FWA Anchor Bolt

Economical solution for all applications where an approved fixation is not required. Available in zinc-plated steel and hot-dip galvanized steel. Available with metric and imperial threads. The reduced anchorage depth enables faster installation. Advantages The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility. Available with metric and imperial threads The Fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanized steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

10 x 115 mm, 10 x 80 mm, 10 x 95 mm, 12 x 100 mm, 12 x 120 mm, 12 x 150 mm, 16 x 105 mm, 16 x 140 mm, 16 x 180 mm, 8 x 80 mm

Mild Steel Cuplock Vertical

1.5 mtr, 1 mtr, 2.5 mtr, 2 mtr, 3 mtr, 500 mm, 10 kg, 11.5 kg, 3 kg, 4.5 kg, 6.5 kg approx., 9 kg

Balbir Mild Steel C Channel (100 x 50 mm, 5 mm Thick)

6 meter, 36 kg, 54 kg

ISI Box Pipe 50 x 50 x 3 mm 6 meter long

MS Scaffolding Base Plate

Mild Steel Cuplock Ledger

1150 mm, 1250 mm, 1.2 mtr, 1450 mm, 1.5 mtr, 1.7 mtr, 1800 mm, 2400 mm, 2.5 mtr, 2 mtr, 600 mm, 900 mm, 950 mm, 10 kg approx, 12 kg approx, 3.75 kg approx, 4 kg approx, 5 kg approx, 6 kg approx, 7.5 kg approx, 7 kg approx, 9.5 kg approx

Fischer Anchor Bolt & Fastener FBN II (10/5)

Fischer Anchor Bolt & Fastener FBN II (Dash Fasteners)

10 x 70 mm

Scaffolding Caster Wheel

6 inch, 8 inch

Mild Steel Scaffolding Round Pipe 50 mm

6 meter, 20 kg

Mild Steel Scaffolding Square / Box Pipe (50 x 50)

6 meter, 20 kg

Loto Safety Lockout Tagout Kit

Sheave Hook Block Pulley (Pully)

1 ton, 500 kg

Scaffolding BRC Board Retaining Coupler For Square Pipe

Material: Steel Framework: Combined Scaffolding Supporting Mode: Projecting Scaffolding Erection Position: External & Internal Scaffolding Scaffolding Part Type: Scaffolding Couplers Construction Properties: Building Scaffolding The scaffold board retaining coupler is a type of board clamp. Normally it is pointed to forged BS1139 EN 74 standard and British-type board clamps. Called BRC couplers too. The forged scaffold board retaining coupler elements include a forged BRC coupler cover, a pressed BRC body, a set of fork bolts and nuts, and a rivet connection between the body and cover.

1.5 inch, 1 inch, 500 gm

Ms Cast Iron Tie Rod Water Stopper / Water Barrier

MS Scaffolding Tripod (Ghodi)

Mild Steel C Channel

75 x 40 mm, 42 kg approx.

Displaying products 21-40 of 53 in total